Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Customized Telescopic Forklift
#1
HNT-110 telescopic forklift
HNT-110 telescopic forklift is front-wheel drive, rear-wheel steering, rigid suspension; adopt hydro-mechanical transmission with two-speed forward and two-speed reverse, full hydraulic power steering, and air-over-oil type drum brake; the working device is composed of the three-stage quadrilateral telescopic boom and boom quick change device and hook. this telescopic forklift is not only applicable to lift the stone slabs in containers, but also can be used as a general crane, can be widely used in factory, dock, freight yard, forest farm, construction material, warehouse, logistics etc industries. it is a loading and unloading machine with wide adaptability and high efficiency.

Product description
1.Using well-known brand diesel engine, with National III emissions, strong power, energy saving and environment protection, to meet the requirements of efficient operations
2.Double turbo hydraulic torque converter, stepless speed change. Single-lever control transmission system, with 2 speeds for forward and reverse gears, easier to operate
3.Use dual-pump combined hydraulic system, greatly reduce the fuel consumption and energy consumption
4.With full hydraulic coaxial flow amplification steering system, turning radius for rear steering axle is small, steering light and flexible   
5.Using front wheel drive, rigid suspention, rear axle steering structure, can achieve four-wheel drive. Front axle spiral bevel gear and wheel side planetary wheel to reduce the speed and increase torque, have excellent load capacity
HNT-110 Telescopic forklift specification
ItemSpecificationRemarks
Rated load (kg)11000In main hook
Operating weight(kg)13000
Max. Lifting height of the main hook (mm)7605Distance from the main hook to the ground
Max. lifting height of the complete arm (mm)10300Front point hoist
Wheel base (mm)2988
Front tread (mm)1638
Rear tread (mm)1785
Min. groud clearance (mm)310
Overall length (mm)5288Without hook
Overall width (mm)2310
Overall height (mm)2715
Height of the cab (mm)2400
Length of rear overhang (mm)1055
Max. outreach of the main hook (mm)4800Horizontal direction
Max. outreach of the complete arm (mm)7900Horizontal direction
Tipping angle of hook, up/down (°)22°/24°
Tipping angle of big arm, up/down (°)14°/43°
Min. turning radius (mm)6800
Max. gradeability (°)≥20%
Max. travelling speed (Km/h)25
Front tyre11.00-20
Rear tyre9.00-20
If with fork, then the load capacity will be 5t

HNT-110 Telescopic forklift performance parameters
ItemHNT50-2Remark
Rated lifting   capacity, kg≤5000
Dead weight, kg13000
Max.lifting height, mm7050the height of fork upper surface to ground
Wheelbase, mm2988
Front wheel tread, mm1638
Front wheel tread, mm1785
Min.ground clearance, mm310
Overall length, mm6230include fork
Overall width, mm2350
Overall   height, mm2715
Inner height of the cab2420
Rear overhang length,mm1055
Max.reach distance, mm5100horizontal direction
Tilt angle of basic boom up/down14°/43°
Min.turning radius,mm6800
Max.Gradeability≥20%
Max.travelling speed, Km/h25
Front wheel11.00-20
Rear wheel9.00-20
Engine ModelDongfeng   CUMMINS 4BT3.9-C100
Rated power, KW75
Rated speed, R/M2200

HNT-110 Telescopic forklift configuration list
Serial No. ItemModelManufacturer
1EngineQSB3.9-C100Cummins(national III)
2Frame/SOCMA
3PumpHefei ChangyuanCBHY-G36/F4.5-ATφR
4AxleFrontXuzhou07BTJ0000
RearSOCMA
5TransmissionZhongnan transmissionYQXD100K.970
6Multi-way valveLinhaiCDB-F20HZT-03C
7Steering gearZhenjiang hydrualicBZZ1-E200

HNT-110 Telescopic Crane loader
Item Parameter Remark
Rated load,kg≤11000
Operating weight  kg13000
Main hook max. lifting height ,mm7605from main hook to the ground)
Max. lifting height with full extended boom,mm10300(front hook)
Wheel base,mm2988
Front wheel tread,mm1638
Rear wheel tread,mm1785
Min. ground clearance,mm310
Overall length ,mm5288without arm
Overall width, mm2350
Overall height,mm2715
Overall height,mm2400
Rear overhang length,mm1055
Main hook max. horizontal reach,mm4800(Horizontal )
Max. horizontal reach,mm7900(Horizontal)
Arm turnning angle up/down  (°)22°/24°
Boom turnning angle up/down(°)14°/43°
Min. turning radius, mm6800
Max. grade abiltiy,(°)≥20%
Max. travelling speed,Km/h25
Front wheel  11.00-20
Rear wheel  9.00-20

Configuation
Serial No.NameModelManufacturer
1Engine4BT3.9-C100(75KW,2200)DCEC Cummins
2Chassis/SOCMA
4Motor/
5Pump
Hefei Changyuan
6Driving axleFront
Xuzhou
Rear
SOCMA
7Transmission
ZHONGNAN
8Multi-way valve
LINGHAI
9Working oil pump
Hefei Changyuan
10Steering gear
Zhenjiang  hydraulicCustomized Telescopic Forklift
website:http://www.socma-forklift.com/telescopic-forklift/
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)